Perform basic programming - AR00.19-P-0200T
WARNING: This page is about a different car, the 2009 Mercedes-Benz E350 and 2008 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 211.0/2/6
| |
Adjust |
|
|
| 1 |
Set time on instrument cluster |
|
|
| 2 |
Calibrate power window |
Move respective window to upper stop and hold power window switch depressed for approx. 1 s. |
|
| 3.1 |
Activating steering angle sensor |
Vehicles up to model year 04 |
AR46.10-P-0300-01T |
| 4.1 |
Normalize panoramic glass roof |
On vehicles with code (413) Panoramic glass roof with top sliding roof:
- Remove panoramic glass roof fuse from fuse box (refer to assignment diagram in the main fuse box cover).
- Reinstall panoramic glass roof fuse.
- Switch on ignition.
- Move sliding roof lining to front and rear stop and hold sliding roof lining switch depressed for approx. 1 s.
- Move panoramic glass roof to front and rear stop and keep roof switch depressed for approx. 1 s.
|
|
| 4.2 |
Normalize tilting/sliding roof |
On vehicles with code (414) Power glass tilting/sliding roof:
- Remove tilting/sliding roof fuse from fuse box (refer to assignment diagram in the main fuse box cover).
- Reinstall tilting/sliding roof fuse.
- Switch on ignition.
- Move tilting/sliding roof to front and rear stop and keep roof switch depressed for approx. 1 s.
|
|