LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2010 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Front Axle -- E550 (211.090)) >> Testing & Repair >> Loosen front shock-absorber strut at transverse control arm and secure - AR33.20-P-0500-06VM

Loosen front shock-absorber strut at transverse control arm and secure - AR33.20-P-0500-06VM

WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.
STRUTS

Number Designation Model 211.08/09/28/29
BA32.25-P-1012-04B Nut of shock-absorber strut to transverse control arm Nm 162

Removing 

  1. Unscrew nut (02) and bolt (01) at front shock-absorber strut and bottom of transverse control arm.

    Install 

  2. Mount bolt (01) and nut (02) on front shock-absorber strut and bottom transverse control arm TORQUE SPECIFICATION .

    IMPORTANT The bolt (01) must be inserted from the front end of the vehicle towards the back.

    Fig 1: Identifying Bolt And Nut On Front Shock-Absorber Strut And Bottom Transverse Control Arm
    G07279726Courtesy of MERCEDES-BENZ OF NORTH AMERICA.