Detaching and attaching hexagon collar bolt on front axle shaft - AR33.30-P-0620-05P
WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.
FRONT AXLE SHAFT
| Number | Designation | Model 203.08/09/28/29 | Model 211.08/09/28/29 | ||
|---|---|---|---|---|---|
| BA33.30-P-1003-02C | Collar bolt, front axle shaft to front axle shaft flange | Stage 1 | Nm | 110 | 70 |
| Stage 2 | ∠° | 60 | 90 | ||
FRONT AXLE SHAFT
| Number | Designation | Model 220.08/18 | ||
|---|---|---|---|---|
| BA33.30-P-1003-02C | Collar bolt, front axle shaft to front axle shaft flange | Stage 1 | Nm | 70 |
| Stage 2 | ∠° | 90 | ||
Removal
- Operate service brake.
- Undo hexagon collar bolt (61a) while holding front axle shaft.
Attaching
- Screw in new hexagon collar bolt (61a)
.
Illustrated on model 203