Remove/install electric parking brake switch - AR42.20-P-0505SX

MODEL 216 

MODEL 221.0 /1 

Fig 1: Identifying Electric Parking Brake Switch Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Turn off ignition
2	Disconnect ground lines from batteries		AR54.10-P-0003SX
3	Lever out and remove left side cover (1) from instrument panel		Fig 2
4	Loosen screw (2)
5	Pull left instrument panel fuse box (F1/7) out of instrument panel	Do not close driver door when left instrument panel fuse box (F1/7) is removed, otherwise the instrument panel, door lining and left instrument panel fuse box (F1/7) will be damaged. Installation:  Observe routing of electrical feed lines. Do not squeeze electrical feed lines!
6	Press catch springs (3) and pull electric parking brake switch (S76/15) forwards out of instrument panel
7	Unplug electrical connector and remove electric parking brake switch (S76/15)
8	Install in the reverse order
	Check
9	Check function of electric parking brake switch (S76/15)

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA