611 589 00 63 00 Connector - WS01.00-P-0057B
FG 01/05/Set B
ENGINES 611/980, 612/965/966, 613, 628, 629, 639, 642, 646, 647/981, 648, 651, 668
ENGINES 648.960 in MODEL 220
ENGINES 646
Use:
Connector for inserting into an injector bore for measuring pressure loss. In combination with adapter R1/4" to connection nipple for quick-coupling from compression recorder set 001 589 76 21 00 or 001 589 78 21 00 also for measuring compression. Attachment is with the original tensioning claw.
NOTE:
Not for engines 611.981/687, 612.981, 647.981.
For engines 611.981/987, 612.981, 647.981 in model 906: only use for AR05.30-D-3510B and AR05.30-D-3510NA
For engines 646 in model 906: only use for AR05.30-D-3510SD
For engine OM 651: Only use in combination with genuine clamping claw OM 642. Drill the fastening bore to a diameter of 7.5 mm.
For engines 611.981/987, 612.981, 647.981 in model 906: only use for AR05.30-D-3510B and AR05.30-D-3510NA
For engines 646 in model 906: only use for AR05.30-D-3510SD
For engine OM 651: Only use in combination with genuine clamping claw OM 642. Drill the fastening bore to a diameter of 7.5 mm.