Remove/install power window on rear side window - AR67.39-P-4150SC

MODEL 216.3

Fig 1: Identifying Power Window On Rear Side Window Remove/Install Components

Courtesy of MERCEDES-BENZ USA

Shown on vehicle with engine 275

MODIFICATION NOTES

3.5.07

Check sealing profile for damage

Step 10

	Remove/install
1	Remove left or right rear side window sealing rail		see AR67.30-P-4070SC
2	Remove rear sidebag unit (2) with bracket	Do not disconnect electrical connector from left rear sidebag squib or right rear sidebag squib.	see AR91.60-P-0694SX
3	Remove impact absorber (3)
4	Fold damping material toward inside, unscrew nuts (4) and remove fuel pump control unit (N118) together with bracket	When removing left power window (1) on vehicles with engine 275.
5	Remove rear control unit together with bracket	When removing right power window (1). It is not necessary to disconnect electrical connectors on rear control unit.	see AR67.39-P-4170SC
6	Remove soundproofing (5)	The damping material (5) can only be removed partially from the inner panel for access to concealed components. Installation: Check butyl cord on rear of damping material (5) for damage; replace if necessary.
			Fig 2
		Sealing cord	see *BR00.45-Z-1086-01A
		Cleaner	see *BR00.45-Z-1025-04A
7	Remove rear side window glass		see AR67.30-P-4000SC
8	Disconnect electrical connector (6) from left rear power window motor (M10/5) or right rear power window motor (M10/6)
9	Unscrew nuts (7).	Installation: Position power window (1) in upper area toward inside and tighten nuts (7).
10	Unscrew bolts (8) and remove reinforcement (9)	Installation: Check butyl cord on rear of damping material (9) for damage; replace if necessary.
		Sealing cord	see *BR00.45-Z-1086-01A
		Cleaner	see *BR00.45-Z-1025-04A
11	Loosen nuts (10) and carefully remove power window (1) from rear side window	Installation: When replacing power window (1), adjust to match distance between inner panel and removed power window (1).
12	Install in the reverse order

Fig 2: Identifying Roller (168 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

AUXILIARY REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1086-01A	Soft top frame sealing profile with metal core 35 m, SEALANT/butyl Bostik 1127	A 005 989 12 71 10
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71