Remove/install fuel filler flap CL element - AR80.20-P-2300SX

MODEL 216.3, 221.0 /1 

Shown on model 221 

Fig 1: Identifying Fuel Filler Flap CL (ZV) Motor, Bracket, Electrical Connector And Spacer

Courtesy of MERCEDES-BENZ USA

MODIFICATION NOTES

12.6.06

Repair method completely modified

	Remove/install
1	Remove tank recess		AR88.60-P-2000SX
2	Remove fuel filler flap CL [ZV] motor (M14/10) with mount (1) in direction of arrow	Installation:  Ensure that guides (2) of bracket (1) are seated correctly in rear fender and spacer (4).
3	Disconnect electrical connector (3)
4	Unscrew bolts from rear of bracket (1) and remove bracket (1) from fuel filler flap CL [ZV] motor (M14/10)	Only when replacing fuel filler flap CL [ZV] motor (M14/10).
5	Install in the reverse order