Paint front mud guards - AZ88.30-P-0003-01SC

Use only paint and paint system approved by Daimler AG.

1. Mask cross-hatch pattern (A) on contour edge of front mud guards (1), according to figure.

   Ensure that no paint or paint fog gets onto the cross-hatch pattern (A) of the front mud guards (1).

2. Pretreat front mud guards (1) according to Daimler AG painting guidelines and paint outside of front mud guards (1) to match vehicle color.

   Outside of new front mud guards (1) is already primed transparently.

3. Remove masking tape from front mud guards (1) when the paint is cured.
   Fig 1: Identifying Cross-Hatched Areas Of Front Mud Guard

   Courtesy of MERCEDES-BENZ USA