Passenger-side outside mirror park position, function - GF88.79-P-2006SX

MODEL 216.3 up to Model Year 8

MODEL 221.0 /1 with CODE (275) Memory package (driver seat, steering column, mirrors) up to Model Year 8

Fig 1: Passenger-Side Outside Mirror Park Position Function Diagram

Courtesy of MERCEDES-BENZ USA

Function requirements

C. 15R On
Outside mirror adjustment switch in passenger mirror position
No manual mirror lens adjustment actuated or memory request active.
Function in COMAND controller unit (A40/3) activated

Function

If the left front door control unit or right front door control unit receives the message "Reverse gear engaged", the right outside mirror is moved to park position stored for the transmitter key (A8/1).

Abort the function

The right outside mirror is automatically returned to the original position, when:

Reverse gear signal is not recognized after 10 s or
vehicle speed is greater than 10 km/h or
outside mirror adjustment selection switch is switched to driver mirror position.

The original position is resumed, even when the right outside mirror has been moved to the park position manually. If the right outside mirror is located in the park position with circuit 15 Off, it is returned after 0.6 s when circuit 15 is switched back on and the transmission is no longer shifted to reverse. If reverse gear is recognized with circuit 15 On, the mirror moves to the park position after 0.6 s.

Store park position

Function requirements

C. 15R On
Reverse gear engaged

First adjust desired position of the right outside mirror manually via the outside mirror adjustment rocker switch.

The park position is stored by the left front seat operation switch group.

When the memory switch is pressed momentarily and then the outside mirror adjustment switch in the passenger-side position is actuated within 3s, the momentary outside mirror position is stored as park position.

The request to store the park position is transmitted to the left door control unit and from there relayed to the right door control unit via the interior CAN. The position and storage data is stored in the right door control unit.

Instrument cluster, component description	A1 Model 221	see GF54.30-P-6000SX
Intelligent servo module (ISM) component description	A80 Model 221 with transmission 722.9	see GF27.19-P-4015SX
Intelligent servo module (ISM) component description	Model 221 with transmission 722.6	GF27.19-P-4015SXA
Outside mirror, component description	M21/1, M21/2	see GF88.79-P-4003SX
CDI control unit component description	N3/9 Model 221.0/1 with engine 642	GF07.16-P-6000SX
ME-SFI [ME] control unit, component description	N3/10 Model 221 with engines 272.965 and 273.961	see GF07.61-P-6000V
ME-SFI control unit, location/task/design/function	N3/10 Model 221 with engine 275.953/982	GF07.61-P-5000M
Driver-side front door control unit, component description	N69/1 Type 216.3	see GF72.29-P-6000SC
Driver-side front door control unit, component description	Model 221.0/1	GF72.29-P-6000SX
Passenger-side front door control unit, component description	N69/2 Model 216.3	see GF72.29-P-6010SC
	Model 221.0/1	GF72.29-P-6010SX
Electronic ignition/starter switch control unit (EIS) component description	N73	see GF80.57-P-6000SX
Central gateway control unit, component description	N93	see GF54.21-P-4170SX
Front seat adjustment switch group, component description	S22	see GF91.29-P-5220SX
Driver power window, outside mirror and trunk lid switch group, component description	S20/1	see GF54.25-P-4230SX