Retrofit GPS antenna - AZ82.61-P-0003-02CX

Wrap felt tape around Global Positioning System (GPS) antenna wiring harness (18) of GPS antenna (retrofit) (A2/23).
Stick double-sided adhesive tape (19) to the underside of the GPS antenna (retrofit) (A2/23).
The upper side of the GPS antenna (retrofit) (A2/23) is denoted by the inscription "TOP".

The area of the GPS antenna (retrofit) (A2/23) to which the tape is going to be affixed must be free of dust and grease.
Wrap felt tape around GPS antenna (retrofit) (A2/23).
Do not cover up the Velcro strip (19) with felt tape.

Fig 1: Identifying Velcro Strip, GPS Antenna (Retrofit) And Adhesive Tape
Courtesy of MERCEDES-BENZ USA
Remove protective foil from Velcro strip of GPS antenna (retrofit) (A2/23) and stick GPS antenna (retrofit) (A2/23), as shown, onto the instrument cluster (A1).
Position GPS antenna (retrofit) (A2/23) in center, to ensure that installation of the instrument cluster (A1) is not obstructed.
Route GPS antenna wiring harness (18) into radio slot.
Route GPS antenna wiring harness (18) further into the front passenger footwell to the Universal Media Interface adapter wiring harness (3).

Fig 2: Identifying Instrument Cluster, And GPS Antenna Wiring Harness
Courtesy of MERCEDES-BENZ USA