LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2009 >> SLK350 Automatic >> Repair and Diagnosis >> Collision >> General Collision Information >> Rear Wall & Rear End >> Testing & Repair >> Left side rear damage - AR64.20-P-1200V >> Prepare rear cross member, spare wheel recess and longitudinal member connection element - AR64.20-P-1200-02V

Prepare rear cross member, spare wheel recess and longitudinal member connection element - AR64.20-P-1200-02V

COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1001-03A Round wire brush, braided, dia. 70 mm
WORKSHOP EQUIPMENT

WE58.40-Z-1001-03A Drill (electric/pneumatic)
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1001-07A Zinc dust paint suitable for spot welding A 000 986 34 42
  1. Grind connection surfaces on rear cross member (3), spare wheel recess (4) and end plate (1) down to bare metal in shaded areas with COMMERCIALLY AVAILABLE TOOLS round wire brush.

    IMPORTANT Sand spot weld flanges down to bare metal on both sides.

  2. Coat insides of connection surfaces with zinc dust paint
    Fig 1: Identifying Connection Surfaces On Rear Cross Member, Spare Wheel Recess And End Plate (Shaded Areas)
    G05028287Courtesy of MERCEDES-BENZ USA
  3. Grind connection surfaces on longitudinal member connection element (2) down to bare metal in shaded areas blank.

    IMPORTANT Sand spot weld flanges down to bare metal on both sides.

  4. Coat insides of connection surfaces with zinc dust paint
    Fig 2: Identifying Connection Surfaces On Longitudinal Member Connection Element (Shaded Areas)
    G05028288Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals