Remove/install windshield washer nozzle - AR82.35-P-6970V
MODEL 171.4
Shown on left windshield washer nozzle
| Remove/install | |||
|---|---|---|---|
| 1 | Open engine hood and move to vertical position | AR88.40-P-1000V | |
| 2.1 | Unscrew bolts (3) and remove air inlet grille cover (2) | When removing left windshield washer nozzle (1). | |
| 3 | Unclip windshield washer nozzle (1) from latching hook (4) and unclip concealed latching hook (arrow) from air inlet grille (7) | ||
| 4 | Detach washer fluid hose (5) from windshield washer nozzle (1) | ||
| 5 | Unplug electrical connector (6) and disconnect windshield washer nozzle (1) | ||
| 6 | Install in the reverse order | ||
| 7 | Check adjustment of windshield washer nozzle (1), adjust if necessary | ||
| Check setting of windshield washer system spray nozzles | AP82.35-P-8252-01V | ||
| Adjustment dimension of spray nozzles for windshield washer system | *BE82.35-P-1001-01A |
TEST AND ADJUSTMENT VALUES FOR WINDSHIELD WASHER SYSTEM
| Number | Designation | Model 171 | ||
|---|---|---|---|---|
| BE82.35-P-1001-01A | Adjustment dimension of spray nozzles for windshield washer system | XL1 | mm | 230 |
| YL1 | mm | 480 | ||
| XL2 | mm | 600 | ||
| YL2 | mm | 190 | ||
| XM1 | mm | - | ||
| YM1 | mm | - | ||
| XM2 | mm | - | ||
| YM2 | mm | - | ||
| XR1 | mm | 230 | ||
| YR1 | mm | 225 | ||
| XR2 | mm | 590 | ||
| YR2 | mm | 320 | ||
| See picture | - | |||