Retrofit control unit and interface - AZ82.70-P-0008-01V
- Position the ICANI box (2) and the handsfree system interface box (3) on the front passenger footrest (9) as shown in the illustration, mark the locations of the mounting holes and then drill Ø 2 mm holes there.
- Mount the control unit to the footrest (9) with standard sheet metal screws (10).
- Route the connector (8) from the telephone mounting bracket to the handsfree system interface box (3) and connect it to the interface box (3) as shown in the illustration (3).
The plugs are designed so they will only fit in the correct socket.