Perform chassis alignment - AR40.20-P-0200V
MODEL 171
| Measuring, adjusting | |||
|---|---|---|---|
| 1 | Drive vehicle onto test site and secure by applying parking brake | ||
| 2 | Carry out conditions and tests for chassis alignment | AR40.20-P-0260SX | |
| 3.1 | Deactivate easy entry/exit feature | Vehicles with memory package (driver's seat, steering column, mirrors) code 275 |
|
| 4 | Using the adapter, install the brake pedal retaining tool between the pedal and the driver's seat | ||
| Fig 1 | |||
| Fig 2 | |||
| 5.1 | Place the transmission in neutral | Vehicles with transmission 716 | |
| 5.2 | Move selector lever to position "P" | Vehicles with transmission 722 | |
| 6 | Open window on driver door and close driver door | ||
| 7 | Switch off ignition | ||
| 8 | Attaching Mercedes-Benz quick-clamping devices | AR40.20-P-0230A | |
| 9 | Fit on measuring heads | ||
| 10 | Unlock turnplates and sliding platforms | ||
| 11 | Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary | AR40.20-P-0301P | |
| 12 | Perform initial measurement | ||
| 13.1 | Checking rear axle camber | According to results of initial measurement. |
AR40.20-P-0331P |
| 14.1 | Adjust rear-axle toe | According to results of initial measurement. | AR40.20-P-0261P |
| 15.1 | Adjust camber and caster at the front axle | According to results of initial measurement. | AR40.20-P-0263P |
| 16.1 | Adjust front axle toe | According to results of initial measurement. | AR40.20-P-0264P |
| 17 | Perform final measurement | ||
| 18 | Detach sensors | ||
| 19 | Detach Mercedes-Benz quick-clamping devices | AR40.20-P-0230A | |
| 20 | Remove brake pedal jack tool with its adapter | Fig 1 | |
| Fig 2 | |||
| 21 | Drive vehicle off measuring system | ||
| 22 | Lock turntables and sliding platforms |