Remove and install center air nozzle - AR83.10-P-4503V

MODELS 171.4 

Fig 1: Identifying Center Air Outlet, Instrument Panel And Guide

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove stowage compartment or beverage holder		AR68.10-P-1600V
2	Release center air nozzle (1) from retainers at bottom (arrow) and unclip upper area from instrument panel (3)	Installation  Ensure that center air nozzle (1) is correctly seated in instrument panel (3) and retainers (arrow).
			Fig 2
3	Pull center air nozzle (1) out of left and right guides (2) from the rear	Installation:  Slide center air nozzle (1) into left and right guides (2).
4	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA