Remove/install retractable trunk partition bracket - AR68.50-P-3100V

MODEL 171.4 

Fig 1: Identifying Retractable Trunk Partition Bracket Components

Courtesy of MERCEDES-BENZ USA

	Removal/installation
	Risk of fire and explosion caused by machining/treating magnesium components	Keep away from ignition sources and open flames.	AS60.00-Z-0006-01R
	Information on machining/treating magnesium components		AH60.00-P-0023-01R
1	Remove retractable trunk partition		AR68.50-P-3000V
2	Remove bottom center trunk paneling		AR68.30-P-4810V
3.1	Unscrew bolts (5) from bracket (6) of navigation processors (N41/1)	On vehicles with code (527a) COMAND APS (with navigation) or code (498) Japanese version
		Power screwdriver/drill	*WH58.30-Z-1007-20A
			*BA54.21-P-1005-01A
4	Unscrew bolts (3)	Observe various bolt lengths (3)
		Power screwdriver/drill	*WH58.30-Z-1007-20A
			*BA54.21-P-1005-01A
5	Move beverage holder (2) toward rear
6	Unscrew bolts (4) and remove retractable trunk partition bracket (1) from trunk
7	Install in the reverse order

CONTROL UNITS

Number	Designation		Model 171
BA54.21-P-1005-01A	Bolt, equipment carrier to body, retractable partition bracket and tank partition wall	Nm	10

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1007-20A	Cordless drill/driver