Removing and installing sealing frame of front lamp unit - AR82.10-P-4745V

MODELS 171.4 

Shown on code (614) bi-xenon headlamp unit at left front lamp unit 

Fig 1: Identifying Sealing Frame Of Front Lamp Unit Components - Shown On Code (614) Bi-Xenon Headlamp Unit At Left Front Lamp Unit

Courtesy of MERCEDES-BENZ USA

	Removal/installation
1	Remove left front lamp unit (E1) and right front lamp unit (E2) and place on suitable surface	When replacing sealing frame (1) of left front lamp unit (E1) or right front lamp unit (E2).	AR82.10-P-4730VA
		When replacing sealing frames (1) of left front lamp unit (E1) and right front lamp unit (E2).	AR82.10-P-4730V
2	Carefully release sealing frame (1) from holding lugs (2) using suitable screwdriver	Installation:  Ensure that sealing frame (1) is correctly seating in left front lamp unit (E1) and right front lamp unit (E2).
3	Remove sealing frame (1) of left front lamp unit (E1) and right front lamp unit (E2) towards the front
4	Install in the reverse sequence