Remove/install washer fluid reservoir heat exchanger - AR82.35-P-6006V
MODEL 171.4 with CODE (875) Heated windshield washer system
| Remove/install | |||
|---|---|---|---|
| Risk of injury
to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. |
Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
||
| 1 | Remove washer fluid reservoir | AR82.35-P-6000V | |
| 2 | Pinch off heating water hoses (2) with clamps (3) | Fig 2 | |
| 3 | Separate connectors (4) with the detaching tool (5) at the hot water hoses (2) | Fig 3 | |
| 4 | Remove heat exchanger (1) | ||
| 5 | Install in the reverse order | ||
| 6 | Correct engine coolant level and check cooling system for leaks. | Engine 113.989 | |
| Engine 271.944, 272.942/963 | AR20.00-P-1010V |