Remove/install front floor covering (right) - AR68.20-P-2070V

MODEL 171.4 

Fig 1: Identifying Right Floor Covering (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Right Floor Covering (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Open Vario roof	See Operating Instructions
2	Remove cover on center console		AR68.20-P-2350V
3.1	Remove HEAT control and operating unit	On vehicles with code (580a) Automatic air conditioning or without code (581b) Comfort automatic air conditioning	AR83.25-P-1125V
3.2	Remove AAC control and operating unit or comfort AAC control and operating unit	On vehicles with code (580a) Automatic air conditioning or with code (581b) Comfort automatic air conditioning	AR83.40-P-6350V
4	Remove upper control panel control unit.		AR54.21-P-1262V
5	Remove cover below instrument panel on right		AR68.10-P-1520V
6	Remove center console		AR68.20-P-2000V
7	Remove right front seat		AR91.10-P-1000V
8	Remove right door sill molding		AR68.30-P-4100V
9	Remove right floor covering in footwell		AR68.30-P-4010V
10	Cut right floor covering (1) at marked separation points (arrows) with sharp knife	The separation points (arrows) are marked on the floor covering
11	Remove right floor covering (1) from vehicle
12	Install in the reverse order