Attaching engine supporting frame and lifting engine - AR33.10-P-0100-01R

Engine support frame see: http://gotis.aftersales.daimlerchrysler.com 

Do not damage fender paint. Do not overstretch coolant lines, do not trap any cables and lines.

1. Unclip the cover on the front face of the engine.
2. Mount engine support frame (1) with its supports on the inner flanges of the fenders on the right and left (arrows) and position the support plate (2) on the radiator crossmember (3).
3. Align the engine support frame (1) horizontally.

   Illustrated on model 230.475 

   Fig 1: Identifying Engine Support Frame, Support Plate And Radiator Crossmember - Illustrated On Model 230.475

   Courtesy of MERCEDES-BENZ USA
4. Engage shackle in the front engine suspension eye at the air pump.
5. Detach the bracket (30m) of the high pressure line (30i) on the oil pan.
6. Lift engine.

   Illustrated on model 230.475 

   Fig 2: Identifying Bracket And High Pressure Line - Illustrated On Model 230.475

   Courtesy of MERCEDES-BENZ USA