Match outside mirror paneling - AR88.70-P-9100-01Q

Fig 1: Identifying Match Outside Mirror Paneling - Workshop Equipment (1 Of 2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Match Outside Mirror Paneling - Workshop Equipment (2 Of 2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Mask outside mirror paneling (1) with adhesive tape
2. Transfer dimension (X) in area (A) from radius and dimension (Y) in center of outside mirror paneling (1).
3. Drill 3.5 mm dia. hole ø in outside mirror paneling (1) in area (A) on surface (B) in a right angle

Ensure that the drill chuck does not damage the outside mirror paneling (1) when drilling.