Wiring diagram, fuel injection and ignition system ME-SFI - PE07.61-P-2000-99SAG
ENGINE 275 in MODEL 221.1 Air supply
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Explanation of color codes | 15 L |
| B17 | Intake air temperature sensor | 5 L |
| B28/4 | Pressure sensor downstream of air cleaner, left cylinder bank | 3 L |
| B28/5 | Pressure sensor downstream of air cleaner, right cylinder bank | 1 L |
| B28/6 | Pressure sensor upstream of throttle valve actuator | 11 L |
| B28/7 | Pressure sensor downstream of throttle valve actuator | 13 L |
| M16/6 | Throttle valve actuator | 7 L |
| M16/6m1 | Actuator motor | 7 K |
| M16/6r1 | Throttle valve actual value potentiometer | 8 K |
| M16/6r2 | Drive actual value potentiometer | 8 K |
| N3/10 | ME-SFI [ME] control module | 4 A |
| N3/10 | ME-SFI [ME] control module | 11 A |
| Y101 | Divert air switchover valve | 10 L |
| Y31/11 | Left cylinder bank boost pressure control vacuum transducer | 14 L |
| Z7/38 | Circuit 87 M1i connector sleeve | 14 G |
| Z7/39 | Circuit 87 M2i connector sleeve | 9 G |
| Z7/41 | Sensor supply connector sleeve | 2 G |
| Z7/41 | Sensor supply connector sleeve | 12 G |
| Z7/43 | Sensor ground connector sleeve | 1 G |
| Z7/43 | Sensor ground connector sleeve | 4 G |
| Z7/43 | Sensor ground connector sleeve | 4 E |
| Z7/43 | Sensor ground connector sleeve | 10 G |
| Z7/43 | Sensor ground connector sleeve | 13 G |