Wiring diagram for ME-SFI [ME] gasoline injection and ignition system control unit - PE07.61-P-2101-97SAE
ENGINE 275 in MODEL 221.1 control unit N3/10, engine side
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 48L |
| A29/1 | Front knock sensor (left side of engine) | 19K |
| A29/2 | Rear knock sensor (left side of engine) | 20K |
| A30/1 | Front knock sensor (right side of engine) | 18K |
| A30/2 | Rear knock sensor (right side of engine) | 18K |
| B11/4 | Coolant temperature sensor | 4K |
| B17/8 | Charge air temperature sensor | 22K |
| B28/4 | Pressure sensor downstream of air filter, left cylinder bank | 23K |
| B28/5 | Pressure sensor downstream of air filter | 23K |
| B28/6 | Pressure sensor upstream of throttle valve actuator | 32K |
| B28/7 | Pressure sensor downstream of throttle valve actuator | 32K |
| B40 | Oil sensor (oil level, temperature and quality) | 2L |
| B6/3 | Camshaft Hall sensor, right cylinder bank | 16K |
| G2 | Alternator | 39L |
| G3/3 | Left O2 sensor upstream of TWC [KAT] | 26K |
| G3/4 | Right O2 sensor upstream of TWC [KAT] | 25K |
| L5 | Crankshaft position sensor | 17K |
| M16/6 | Throttle valve actuator | 30K |
| N3/10 | ME-SFI [ME] control unit | 12A |
| N3/10 | ME-SFI [ME] control unit | 20A |
| N3/10 | ME-SFI [ME] control unit | 30A |
| N3/10 | ME-SFI [ME] control unit | 4A |
| N3/10 | ME-SFI [ME] control unit | 39A |
| N92/1 | ECI ignition module, right cylinder bank | 7K |
| N92/2 | ECI ignition module, left cylinder bank | 12K |
| Y101 | Divert air switchover valve | 32K |
| Y31/5 | Boost pressure control pressure transducer | 33K |
| Y32 | Air pump switchover valve | 24K |
| Y62 | Fuel injection valves | 36K |
| Z5 | Connector sleeve (solder connector in harness) | 25G |
| Z7/41 | Sensor supply connector sleeve | 1G |
| Z7/41 | Sensor supply connector sleeve | 16G |
| Z7/43 | Sensor ground connector sleeve | 3G |
| Z7/43 | Sensor ground connector sleeve | 21G |
| Z7/43 | Sensor ground connector sleeve | 21E |