Pull off rubber mount with grooved ball bearing - AR41.10-P-0100-07SX

Fig 1: Identifying Two-Armed Puller (000 589 88 33 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Puller Arms (129 589 00 34 00)

Courtesy of MERCEDES-BENZ USA

1. Position puller with puller arms (see magnified section).
2. Pull rubber mount (7b) together with grooved ball bearing off the linkage arm.

Fig 3: Pulling Rubber Mount With Grooved Ball Bearing

Courtesy of MERCEDES-BENZ USA