Risk of injury caused by scraping or cutting body parts on sharp vehicle part - AS00.00-Z-0017-01A

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. 

Risk of injury 

When performing work on body parts, major assembly parts and chassis parts that, due to their manufacturing process or their finishing stage, have not or have not yet been deburred, there is the risk of injuries caused by cutting, tearing or scraping on non-deburred edges.

Safety instructions/precautions 

• Wear protective gloves.
• Deburr repair panels and edges that have been cut.
• Protect sharp-edged components against contact