Retrofit MOST fiber optic cable wiring harness - AN82.61-P-0001-06GZ

Model 164 /251 

Shown on model 164.1 

1. Disconnect and remove old interior MOST carrier element (1) and radio MOST carrier element.

   Tape the ends of the old fiber optic cables so that they cannot be reused.

1. 3 Route new  fiber optic cable (2) from the radio opening to the CD changer installation location and to the A-pillar.

   Route fiber optic cable (2) along air conditioning air duct (3) and secure with adhesive tape (4).

   Fig 1: Identifying MOST Fiber Optic Cable Wiring Harness Components Location

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

   Ensure that the MOST carrier elements for radio (5), CD changer (6) and the interior (7) are positioned correctly. Connectors are marked on the fiber optic cable.

2. 4 Insert MOST carrier element for interior (7) into interior line (8).