Remove/install level control valve unit - AR32.31-P-0650GZ
MODEL 164 with CODE (489) Airmatic (air suspension with level adjustment and adaptive damping system ADS)
| Remove/install | |||
|---|---|---|---|
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Raise vehicle until the wheels are clear of the ground | ||
| 2 | Empty AIRmatic system using STAR DIAGNOSIS | STAR DIAGNOSIS diagnostic system | *WH58.30-Z-1048-13A |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 3 | Remove AIRmatic compressor unit | AR32.22-P-2001GZ | |
| 4 | Remove bolts (1) and detach AIRmatic valve unit (Y36) | ||
| 5 | Remove bolts (2) and detach compressor unit bracket | ||
| 6 | Separate electrical plug connection (3) | ||
| 7 | Remove plug from AIRmatic pressure sensor | ||
| 8 | Disconnect connector from AIRmatic valve unit (Y36) | ||
| 9 | Unscrew pressure line connection (4) | If pressure line connections or pressure lines are damaged: ↓ |
|
| Repair AIRmatic pressure line connection | AR32.22-P-2001-02GZ | ||
| *BA32.22-P-1004-03B | |||
| Fig 3 | |||
| Fig 2 | |||
| 10 | Remove AIRmatic valve unit (Y36) | ||
| 11 | Install in the reverse order | ||
| 12 | Fill AIRmatic system using STAR DIAGNOSIS | ||
| STAR DIAGNOSIS diagnostic system | *WH58.30-Z-1048-13A | ||
| 13 | Check AIRmatic for leaks. | AR32.22-P-8100GZ |
AIR SUSPENSION
| Number | Designation | Model 164.1/8 with AIRmatic, code 489 | ||
|---|---|---|---|---|
| BA32.22-P-1004-03B | Pressure line of air suspension to valve unit | dia. 4 mm | Nm | 2 |
| dia. 6 mm | Nm | 3.5 | ||
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS diagnostic system, Compact Passenger Car | 6511 1801 00 |