Removing and installing wiper system - AR82.30-P-6400GZ: Notes

MODEL 164 

Fig 1: Identifying Wiper Motor, Wiper System Bracket, Electrical Connector, Wiper System And Bolts

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
	Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Remove water repellent over wiper system		AR83.25-P-1406GZ
2	Remove screw (1)	Do not change installation position of wiper system bracket (3) at partition wall, since this would change the contact pressure of the wiper arms and therefore the wipe pattern.
3	Unscrew bolt (2)		*BA82.30-P-1003-01J
4	Lift wiper system (4) and disconnect electrical connector from wiper motor (M6/1)
5	Remove wiper system (4)
6	Install in the reverse order
7	Perform function test of wiper system

WINDSHIELD WIPER

Number	Designation		Model 164.1/8
BA82.30-P-1003-01J	Bolt for window wiper frame to body	Nm	20