Remove/install parking brake lever with bearing bracket - AR42.20-P-0502GR
MODEL 463.202 /222 /236 /237 /243 /244 /245 /246 /247 /248 /249 /250 /254 /270 /271 /303 /306 /309 /322 /323 /332 /333 /336 /340 /341 /346
| Remove/install | |||
| 1 | Remove center console | Model 463.202 /222 /236 /243 /244 /245 /247 /248 /250 /254 /270 /303 /306 /309 /322 /323 /332 /333 /336 /340 /341 /346 | AR68.20-P-2000GA |
| Model 463.237 /246 /249 /271 | AR68.20-P-2000US | ||
| 2 | Remove ventilation duct (1) | ||
| 3 | Detach parking brake connector (X20/10) | ||
| 4 | Unscrew both adjusting nuts (2) | ||
| 5 | Unscrew nuts (5). | *BA42.20-P-1003-01B | |
| 6 | Remove parking brake lever (4) with mounting console (3) | ||
| 7 | Install in the reverse order | ||
| 8 | Adjust parking brake on roller dynamometer | AR42.20-P-0550GG |
PARKING BRAKE
| Number | Designation | Model 463 as of 1.12.00 | |
|---|---|---|---|
| BA42.20-P-1003-01B | Nut, handbrake lever bearing bracket to center tunnel | Nm | 8 |