Checking rear axle camber - AR40.20-P-0331T
MODEL 211.0 /2 /6, 219.3
| Checking | |||
| 1 | Checking rear axle camber | Camber at vehicle level | *BE40.20-P-1001-09T |
| Permissible rear axle camber between right and left vehicle side If substantial deviations in the rear axle camber are found, the cause may be one of the following:
Experience shows that deformations caused by an accident also has an effect on the toe. Check for impermissible deformation on body. Refer to: ↓ |
*BE40.20-P-1002-09T | ||
| Check accident vehicles and vehicles possibly damaged in an accident. | AR40.30-P-0400P |
TEST VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 211.0/2/6 | Model 219 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09T | Camber at vehicle level | +4.2° | ∠° | -0° 30' (±30') | -0° 30' (±30') |
| +3.1° | ∠° | -0° 40' (±30') | -0° 40' (±30') | ||
| +2.1° | ∠° | -0° 52' (±30') | -0° 52' (±30') | ||
| +1.0° | ∠° | -1° 04' (±30') | -1° 04' (±30') | ||
| -0.0 ° | ∠° | -1° 18' (±30') | -1° 18' (±30') | ||
| -1.1° | ∠° | -1° 30' (±30') | -1° 30' (±30') | ||
| -2.1° | ∠° | -1° 43' (±30') | -1° 43' (±30') | ||
| -3.2° | ∠° | -1° 58' (±30') | -1° 58' (±30') | ||
| -4.2° | ∠° | -2° 12' (±30') | -2° 12' (±30') | ||
| -5.3° | ∠° | -2° 30' (±30') | -2° 30' (±30') | ||
| -6.3° | ∠° | -2° 45' (±30') | -2° 45' (±30') | ||
| BE40.20-P-1002-09T | Permissible difference in rear axle camber between right and left sides of the vehicle | ∠° | 30' | 30' | |