Retrofit AMG light alloy wheels - AZ40.10-P-0003T

MODEL 211 except CODE (Z04) Light armoring except CODE (Z06) B6 armoring except CODE (Z07) Top protection except 4-MATIC

MODEL 211 with CODE (489) Airmatic (semi-active air suspension) with CODE (950) AMG sport package with CODE (952) Sport package with 4-MATIC

AMG spoked wheel Styling III

8Jx18 EH2 ET 30 (B6 603 1220)

9Jx18 EH2 ET 39 (B6 603 1221)

8.5Jx18 EH2 ET 30 (B6 603 1222)

9.5Jx18 EH2 ET 33 (B6 603 1223)

For possible tires see Technical Inspection Association (TUV) approval certificate.

Fig 1: Identifying AMG Spoked Wheel Styling III

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

AMG spoked wheel Styling IV

8Jx18 EH2 ET 30 (B6 603 1300)

9Jx18 EH2 ET 39 (B6 603 1301)

8.5Jx18 H2 ET 30 (B6 603 1311)

9.5Jx18 H2 ET 33 (B6 603 1312)

For possible tires see Technical Inspection Association (TUV) approval certificate.

Fig 2: Identifying AMG Spoked Wheel Styling IV

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

AMG spoked wheel Styling V

8.5Jx18 H2 ET 30 (B6 603 1111)

9.5Jx18 H2 ET 33 (B6 603 1112)

For possible tires see Technical Inspection Association (TUV) approval certificate.

Fig 3: Identifying AMG Spoked Wheel Styling V

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	A prerequisite for the use of the wheels/tires combination is the complete implementation of the scopes described	In the Federal Republic of Germany, modification approval is required after conversion from an officially recognized expert or inspector from a motor vehicle test center or a test engineer from an officially recognized supervisory organization.
	Tire approval certification	Model 211.004 /006 /016 /020 /022 /023/026 /028 /029 /042 /054 /056 /061 /065 / 070 /076 /080 /082 /083 /084 /087 /089 / 092 /206 /216 /220 /222 /223 /226 /242 / 254 /256 /261 /265 /270 /276 /280 /282 / 283 /284 /287 /289 /292. * For Germany only	OF40.10-P-1000-01RA
	Wheel/tire combinations		AZ40.10-P-0001-01K
	Tire inflation pressure	See part approval report.
	Remove
1	Remove standard wheels		AZ40.10-P-0001-03B
2.1	Replace standard front stop buffer	Only on vehicles without MB sport suspension (code 486) or Airmatic (semi-active air suspension) (code 489): ↓
	Replace standard front stop buffer	Dismantle and assemble suspension strut Model 211.0, 211.2	AR32.25-P-1018TS
	Install
3	Fit special wheels	For screwing on wheels use only M14 x 1.5x27 spherical collar bolts (standard).	AZ40.10-P-0001-08C

PARTS ORDERING NOTES

Part no.	Designation	Quantity
B6 603 12 20	Light alloy disk wheel 8Jx18 EH2 ET 30 (Styling III) with rubber valve and wheel trim cover	2 or 4
B6 603 12 21	Light alloy disk wheel 9Jx18 EH2 ET 39 (Styling III) with rubber valve and wheel trim cover	2
B6 603 13 00	Light alloy disk wheel 8Jx18 EH2 ET 30 (Styling IV) with rubber valve and wheel trim cover	2 or 4
B6 603 13 01	Light alloy disk wheel 9Jx18 EH2 ET 39 (Styling IV) with rubber valve and wheel trim cover	2
B6 603 12 22	Light alloy disk wheel 8,5 Jx18 EH2 ET 30 (Styling III) with rubber valve and wheel trim cover	2 or 4
B6 603 12 23	Light alloy disk wheel 9,5 Jx18 EH2 ET 33 (Styling III) with rubber valve and wheel trim cover	2
B6 603 11 11	Light alloy disk wheel 8.5J8x18 H2 ET 30 (Styling V) with rubber valve and wheel trim cover	2 or 4
B6 603 11 12	Light alloy disk wheel 9,5Jx18 H2 ET 33 (Styling V) with rubber valve and wheel trim cover	2
A220 400 01 25 9715	Hub cap (included in parts kit)	as required
A000 400 02 13	Rubber valve (included in parts kit)	as required
A211 401 03 70	Wheel bolt M14x1,5x27 (standard, not included in parts kit)	as required
B6 603 13 11	Light alloy disk wheel 8,5 Jx18 H2 ET 30 (Styling IV) with rubber valve and wheel trim cover	2 or 4
B6 603 13 12	Light alloy disk wheel 9,5 Jx18 H2 ET 33 (Styling IV) with rubber valve and wheel trim cover	2
A211 323 02 44	Pressure stop damper (not included in parts kit)	as required