Wheel Alignment Form - OF40.20-P-3000-01B

MODEL 129, 140, 163, 166, 168, 169, 170, 171, 172, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 450, 451, 452, 454

COMPLAINT OR REASON FOR MEASUREMENT

Tire make		Tire designation				Tire driven distance: km/miles
				Left front	Right front	Left rear	Right rear
Tire inflation pressure (cold tire) bar/psi/kPa
Tire tread depth (mm)			outside
			center
			inside
				before the correction			After the correction
Vehicle level - front axle ready to drive (mm)			Left
Vehicle level - front axle ready to drive (mm)			Right
Ball point position			Left
Ball point position			Right
Vehicle level at rear axle ready to drive (mm)			Left
Vehicle level at rear axle ready to drive (mm)			Right
Control point with level control (mm)
Rear axle	Camber +/- (°)		Left
	Camber +/- (°)		Right
	Toe +/- (°)		total
			Left
			Right
Front axle	Camber +/- (°) (for 0 toe)		Left
	Camber +/- (°) (for 0 toe)		Right
	Caster (°)	via steer angle	Left
		via steer angle	Right
		for 0 toe	Left
		for 0 toe	Right
	Toe difference-turns +/- (°)	Right steer for right wheel 20°
	Toe difference-turns +/- (°)	Left steer, left wheel 20°
	Toe +/- (°)	Unpressed	total
		PRESSE D	total
			Left
			Right
	Maximum steering angle on inner wheel (°)		Left
	Maximum steering angle on inner wheel (°)		Right