Secure twelve-point and hexagon collar nut on drive pinion joint flange - AR35.31-P-0530-01B
| AR35.31-P-0530-01B | Secure twelve-point and hexagon collar nut on drive pinion joint flange | |
| Chisel for securing collar nut on joint flange | WF58.50-P-3531-01A |
Do not subject to hard axial blows.
- Use a caulker to caulk the twelve-point collar nut or hexagon nut with collar (40) into one of the two grooves of the drive pinion gear so that there is no longer a gap between the groove and the locking tabs.
Shown on 198 mm dia. rear axle center assembly