601 589 04 33 00 Puller - WS33.00-P-3052B
FG 01/33/Set B
MODEL 460, 461, 463 with FRONT AXLE 730.3
MODEL 601, 602, 611, 901, 902, 903, 904, 667 with FRONT AXLE 730.4
MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG3) Gear reduction for all-wheel drive
MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG1) Engageable all-wheel drive
MODEL 903.0 /4 /6, 904.0 /4 /6 with CODE (ZG2) Permanent all-wheel drive
MODEL XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7, WD1, WD2, WD3, WD6, WD7
MODEL 905 with FRONT AXLE 730.606
MODEL 169, 245.20 /23
MODEL 164.1, 251, 164.8
| Further use | FG 32/Set B | WS32.00-N-3074B |
| FG 33/Set B | WS33.00-N-3052B | |
| FG 46/00/Set B | WS46.00-P-0064B |
Use:
Puller for ball joints on tie rods and drag links. (as of 07/80).
NOTE:
Models 164.1, 251 puller for ball joint, steering knuckle on upper transverse control arm. Only in combination with thrust piece 140 589 00 63 00.