Risk of fire and explosion caused by machining/treating magnesium components - AS60.00-Z-0006-01R

Keep away from ignition sources and open flames. 

Potential risks 

• Risk of fire and explosion caused by machining/treating magnesium components.
• Moreover during the mechanical processing with coolant lubricants mixed with water there is the danger of hydrogen occurring which represents an additional risk of explosion (oxyhydrogen gas).
• Magnesium chips or dust mixed with oxygen has a tendency to burn or explode.
• Further information can be seen in the accident prevention regulations or in the specifications of the professional/trade association.

Safety precautions/instructions 

• During machining/treating work do not smoke, stay away from ignition sources and open flames.
• Store and transport magnesium chips only in dry, tightly sealed containers.

These containers must be stored in a cool place.

Fire protective measures, suitable fire extinguishing agents are: 

• Fire class D extinguishers (with powder nozzle), dry extinguishing blankets or dry sand.

On no account should the following be used:  fire classification A, B, C fire extinguishers, water, carbon dioxide (CO₂ ) or nitrogen.

First aid measures for burns 

• Following administration of first aid you should always consult a medical service or physician.