Remove/install rear door holder - AR72.12-P-2100T
MODEL 211.0/2
Shown on left rear door
| Remove/Install | |||
|---|---|---|---|
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | AS00.00-Z-0011-01A | |
| 1 | Remove loudspeaker in rear door | AR82.62-P-7874T | |
| 2 | Unscrew nuts (2) | *BA72.12-P-1013-01A | |
| 3 | Remove cover (3). | ||
| 4 | Remove bolts (4) | *BA72.12-P-1012-01A | |
| 5 | Remove door holder (1) from rear door | ||
| 6 | Install in the reverse order |
REAR DOOR
| Number | Designation | Model 211 | |
|---|---|---|---|
| BA72.12-P-1012-01A | Screw for door holder on B-pillar | Nm | 10 |
| BA72.12-P-1013-01A | Nut, door holder to rear door | Nm | 10 |