Apply adhesive material for rear glass roof - AR77.21-P-0600-03T
MODIFICATION NOTES
| 13.12.05 | Repair products modified |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1089-02A | Repair kit, installing window, 1-component adhesive, replaced by: A 221 670 81 01 | A 221 670 21 01 |
Wear cotton gloves. Ensure that no fingerprints are present in the area of the adhesive surface.
- Cut triangular opening of application nozzle so that adhesive can be applied with a height of approx. 14 mm and a width of approx. 8 mm.
- Guide application nozzle along adhesive surface on flange while uniformly pressing out adhesive.
Immediately remove contamination caused by the adhesive. Completely remove excess adhesive from cartridges immediately after applying adhesive and dispose of it as per local regulations.