Use of paint cleaners - AP98.00-P-0637A

MODEL All 

with high-gloss varnish paintwork 

	Application
1	Wash and dry the vehicle		AP98.00-P-0635-01A
		Car Wash	*BR00.45-Z-1002-04A
		Tar remover	*BR00.45-Z-1020-04A
		Insect remover	*BR00.45-Z-1021-04A
2	Polish the paintwork surface with paint cleaner	Shake cans vigorously before use. Apply paint cleaner and polish the paintwork surface vigorously by hand until the desired luster is obtained. In the case of clearcoat paint systems with higher scratch-resistance observe corresponding notes in the Service information : ↓ Service Information: Clearcoat paint systems with higher scratch resistance:
		Model 164, 170, 171, 203, 204, 207, 209, 211, 212, 215, 216, 219, 220, 221, 230, 251, 463	SI98.00-P-0013A
		Paint cleaner	*BR00.45-Z-1016-04A
3	Buff up the surface with polish and a polishing wad	In order to make polishing work easier, use clean polishing wads or clean polishing cloth while changing them frequently.	AP98.00-P-0639A
4	Rub off polish residues	After drying, a light film is formed. Using a clean polishing wad moistened in water, rub until the surface is clear.
5	Treat the surface with gloss preserver	Gloss preservation protects the paintwork against premature matting.	AP98.00-P-0641A