Rear door power window switch, function - GF72.29-P-4104-02T

The position of the rocker switch is voltage-coded by means of resistors. The coded voltage is read in by the corresponding left rear door control module (N69/3), right (N69/4).

On model 211.6, the number of the power window motors and door control modules in the rear can vary depending on the equipment and special body

The rocker switch has five mechanical positions: 

Center position Neutral

First detent (pull) manual raising

Second detent (pull) Automatic raising

First detent (push) manual lowering

Second detent (push) Automatic lowering