Adjusting fixtures for distance and comparative measurement according to the model concerned - AR40.30-P-0401-01T

Fig 1: Identifying Mount (170 589 00 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Insert hanger (07) horizontal and adjust dimensions on the supports (07r, 07s), see Table.

   The suspension (07) enables the vehicle center to be displayed with the check point (K).

Shown on model 211 without 4MATIC 

Fig 2: Inserting Hanger Horizontal (Shown On Model 211 Without 4MATIC)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 211 with 4MATIC 

Fig 3: Inserting Hanger Horizontal (Shown On Model 211 Without 4MATIC)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Left And Right Side Support Adjustment Dimensions

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.