Disk wheel changes, tire conversion and suspension changes - AN40.10-P-1050T

MODEL 211.0/2 

Fig 1: View Of Wheel & Tire

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Notes on conversion to 17- or 18-inch tires	Model 211	AH40.10-P-0008-01TB
	Conversion to 17 or 18 inch tires	The standard jounce buffers on the front axle must be replaced by new rubber stops. National legislation must be taken into account before converting to 17 or 18 inch tires.
	Disassemble/assemble suspension strut	On model 211.0/2 except code 489 Airmatic (semi-active air suspension) Rubber buffer: With standard suspension With code 485 Standard suspension instead of Avantgarde suspension With code 494 California version With code 482 Suspension with increased ground clearance Part no.: A 211 326 026 8 Rubber buffer: With code 954 Avantgarde up to model refinement package 06.2006 Part no.: A 211 323 024 4	AR32.25-P-1018TS

PARTS ORDERING NOTES

Part no.	Designation	Quantity
A 211 326 026 8	Rubber bumper for standard suspension
A 211 323 024 4	Rubber bumper for Avantgarde