Pull inner bearing race off rear-axle shaft flange - AR35.20-P-0130-02TX

Fig 1: Identifying Puller (001 589 50 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Chuck (211 589 02 34 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Thrust Piece (124 589 02 34 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Clamp rear axle shaft flange (1) in vise.
2. Pry protective ring (3) off bearing inner race (2).
3. Mount thrust piece (04) on rear axle shaft flange (1).
   Fig 4: Identifying Rear Axle Shaft Flange Components

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
4. Screw collet (02) onto puller (01) and tighten.
5. Mount puller (01) on bearing inner race and clamp securely.
6. Screw in thrust spindle (03) and pull bearing inner race off rear axle shaft flange (1) using puller (01).
   Fig 5: Pulling Bearing Inner Race Off Rear Axle Shaft Flange

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.