Turn rack-and-pinion steering to center position, mount steering coupling - AR46.20-P-0600-01P

1. Turn rack-and-pinion steering to center position.

   Turn so that the marking on cap is in alignment with the marking on the control valve housing (arrows).

2. Mount steering coupling.

Shown on model 203 

Fig 1: Locating Control Valve Housing Alignment Marks - Shown On Model 203

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 220 with 4MATIC 

Fig 2: Locating Control Valve Housing Alignment Marks - Shown On Model 220 With 4MATIC

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 211 with 4MATIC 

Fig 3: Locating Control Valve Housing Alignment Marks - Shown On Model 211 With 4MATIC

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.