Convenience automatic air conditioning box design - GF83.40-P-2170-01TT

Structure 

The comfort automatic air conditioning housing contains the following components:

• Heating system heat exchanger
• Evaporator
• Blower motor (A32m1) with blower regulator (A32n1)
• Heater booster (R22/3)
• Expansion valve
• Activated charcoal filter
• Air duct flaps
  • Fresh and recirculated air flaps
  • Blending air flap, left
  • Blending air flap, right
  • Footwell flap, left
  • Footwell flap, right
  • Defroster flap, left
  • Defroster flap, right
  • Air flap center nozzle, left
  • Air flap center nozzle, right
  • Blending air flap rear left
  • Blending air flap rear right
• Positioning motors
  • Fresh air and recirculated air flap actuator motor (M2/5)
  • Left blend air flap actuator motor (M2/6)
  • Right blend air flap actuator motor (M2/7)
  • Left footwell flap actuator motor (M2/10)
  • Right footwell flap actuator motor (M2/11)
  • Left defroster vent flap actuator motor (M2/8)
  • Right defroster vent flap actuator motor (M2/9)
  • Left center air outlet flap actuator motor (M2/12)
  • Right center air outlet flap actuator motor (M2/13)
  • Left rear blend air flap actuator motor (M16/30)
  • Right rear blend air flap actuator motor (M16/31)

The components are accommodated in a housing and therefore form a unit.