Automatic air conditioning housing design - GF83.40-P-2105-04T

Structure 

The automatic air conditioning housing contains the following components:

• Heating system heat exchanger
• Evaporator
• Blower motor (A32m1) with blower regulator (A32n1)
• Heater booster (R22/3)
• Expansion valve
• Air duct flaps
  • Fresh and recirculated air flaps
  • Blending air flap, left
  • Blending air flap, right
  • Left and right footwell flaps
  • Left and right defroster flaps
  • Center outlet flap
• Positioning motors
  • Fresh air and recirculated air flap actuator motor (M2/5)
  • Left blend air flap actuator motor (M2/6)
  • Right blend air flap actuator motor (M2/7)
  • left and right footwell flaps actuator motor (M2/15)
  • left and right defroster vent flaps actuator motor (M2/16)
  • Center outlet flap actuator motor (M2/22)

The components are accommodated in one housing and thus form one unit.