Remove/install additional battery relay - AR54.15-P-2000T

MODEL 211.0/2/6 up to 31.5.06 

Fig 1: Identifying Additional Battery Relay Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Shown on model 211.0 

	Remove/install
1	Remove water collector at right-hand side until additional battery relay (K57/2) is accessible		AR83.25-P-1402T
2	Disconnect ground cable from additional battery		AR54.10-P-0007T
3	Disconnect electrical connector (1) from additional battery relay (K57/2)
4	Unscrew nuts (2); remove electrical lines (3) and apply markings to them	Installation:  Observe markings on electrical lines (3).
			*BA54.10-P-1011-01C
5	Unscrew nuts (4) and remove additional battery relay (K57/2)		*BA54.10-P-1010-01C
6	Install in the reverse order

BATTERY

Number	Designation			Model 211
BA54.10-P-1010-01C	Nut, relay of additional battery to body	M6	Nm	8
BA54.10-P-1011-01C	Nut, line connection to relay of additional battery	M6	Nm	7