SCAN coding of control units - AR54.21-P-0015X

MODEL 129.058/063/067/076,163,164,168,169,170,171,199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 251, 450, 452, 454, 461.302/304/305/331/332/333/334/340/342/343/344/345/346, 463.206/208/209/232/233/240/241/243/244/245/246/247/248/249/250/254/270/271/303/308/309/322/323/332/333/340/341 

		It is important to ensure an adequate voltage supply for the on-board electrical system throughout the entire work procedure as the control units could be damaged if undervoltage occurs.
1	Connect STAR DIAGNOSIS and start Diagnosis Assistance System (DAS)
	Connect STAR DIAGNOSIS and read out fault memory	Model 129, 163, 164, 168, 169, 170, 171, 199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 251, 461,463	AD00.00-P-2000-04A
		Model 450	AD00.00-P-2000-04SM
		Model 452	AD00.00-P-2000-04RR
		Model 454	AD00.00-P-2000-04FF
2.1	Code online software calibration number (SCN)	With networked STAR DIAGNOSIS diagnosis system	AR54.21-P-0013-01X
2.2	Code offline software calibration number (SCN)	With non-networked STAR DIAGNOSIS diagnosis system	AR54.21-P-0013-04X
3	Read out fault memory, erase if necessary
4	Close STAR DIAGNOSIS