Pulling off rubber mount with grooved ball bearing - AR41.10-P-0100-07I

Fig 1: Identifying Two-Legged Puller (000 589 88 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Puller Arms (129 589 00 34 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Position puller with pulling arms (see magnified section).
2. Pull rubber mount (7b) together with grooved ball bearing off the joint fork.

   Shown on linkage arm in model 220 

   Fig 3: Pulling Rubber Mount

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.