Remove SBC bracket (engine installed) - AR62.20-P-1260-09T

Fig 1: Locating SBC Bracket Area A

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Drill rivets on SBC bracket (1) with 6.5 dia. bit. (area A).
2. Cut rivet heads out on SBC bracket (1) with spherical cutter (area B).
3. Remove SBC bracket (1)
4. Remove rivet residues from longitudinal member with hammer and punch
5. Remove grinding and drilling chips using wet/dry vacuum cleaner

Shown on model 211.0