LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2009 >> E350 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes -- Testing & Repair -- E350 (211.256) >> Testing & Repair >> Disconnect electrical connector - AR42.10-P-1040-04TV

Disconnect electrical connector - AR42.10-P-1040-04TV

  1. Press detent (1) upwards with screwdriver and pull RPM sensor connector (signals) (X62) out of the bracket (2) in the direction of the arrow.
  2. Press detent (3) upwards with screwdriver and pull left front brake pad contact sensor connector (S10/1x1) and right front brake pad contact sensor connector (S10/2x1) out of the bracket (2) in the direction of the arrow.

    Illustration in mirror reverse to front right longitudinal member 

    Fig 1: Pulling Left/Right Front Brake Sensor Connectors Out Of Bracket
    G07249385Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  3. Unlock and disconnect RPM sensor connector (signals) (X62) and brake pad contact sensor.
  4. Unclip electrical cable from bracket (4) on side member.

    IMPORTANTInstallation:  Ensure lines are installed correctly.

scientia non olet · About LEMON Manuals